Please find all technical specifications for Interlocking rubber tiles. We are producing the finest quality of rubber tiles by keeping every Specifications in mind from our past experiences.
We have design and engineered best size which is easy to install and manage globally.
| Product Name | Interlocking Rubber Tiles |
|---|---|
| Length | 480mm/19 Inch |
| Width | 480mm/19 Inch |
| 1 Tile cover | 2.50 square feet |
| Colours Available | Terracotta red, Blue, Hunter Green, Chocolate, Silver, Basic Black, Grey, Golden Yellow. |
| Thickness Available | 15mm,20mm,25mm, |
| Top 5mm Layer of the surface rubber tiles | Pigmented with crumb rubber granules |
| Bottom Base for rubber tiles | Basic black crumb rubber granules |
| Granules Range | 0.8mm to 2mm |
| Require Special Adhesive | No |
| Require Installer | No |
| Packing | Wrapped in pallets with pp bags properly |
| Material | Sbr Rubber Tiles made from crumb rubber granules with polyurethane polymerically bonded |
| Hot Molded Technology | Yes |
| Certification | ASTM and DIN standard Approved. |
| Hardness | A 60 (ASTM D2240) |
| Tensile Strength (Mpa) | 1.29 (DIN 53504 Force 55.4N) |
| Elongation at break (%) | 47% (ASTM D573) |
| Tear Strength (N/mm) | 40.1% strain@Break(%) |
| Specific Gravity (g/cm3) | 0.88 |
| Compression set (%) | 7.23 Mpa at 25% Deflection, test speed-5mm/min. pre-load-2n (DIN 53577) |
| Operating Temperatures (continuous use) (*c) | 140-150 |
